SWITCHING BETWEN X-INPUT AND
D-INPUT MODES
To switch between X-Input and D-Input modes while wheel is connected to PC,
press and hold MODE button for 3 seconds.
Red LED will solid lit after change is done.
Button programming
Buttons YAXB, LB, LT, RB and RT (BASE buttons) - can be assigned to L-paddle,
R-paddle, throttle pedal, brake pedal, gear up, gear down (FUNCTION buttons).
Press simultaneously and hold for 3 seconds SHARE and OPTION buttons.
When green LED is lit in center of wheel, release buttons.
Press desired FUNCTION button, to which other BASE button function will be
assigned. Green LED will start blinking.
Press desired BASE button. It's default function will be now assigned to previously
pressed FUNCTION button. Green LED will shut o .
Clear single button assignment
Press simultaneously and hold for 3 seconds SHARE and OPTION buttons.
When green LED is lit in center of wheel, release buttons.
Press programmed button once, after LED starts blinking press same button
again.
Default function is restored.
Safety information
Use as directed.
Non-authorized repairs or taking the device to pieces make the warranty void
and may cause the product damage.
Avoid to hit or friction with a hard object, otherwise it will lead to grind
surface or other hardware damage.
Do not use the product in low and high temperatures, in strong magnetic
elds and in the damp or dusty atmosphere.
Do not drop, knock, or shake the device. Rough handling can break it.
Slots and openings in the case are provided for ventilation and should not be
obscure. Blocking the vents can cause overheating of the device.
Wheel sensitivity setup
Press simultaneously and hold for 3 seconds SHARE and OPTION buttons.
When green LED is lit in center of wheel, release buttons.
Press SHARE again to show current sensitivity level. There are 3 levels: LED is
slowly blinking: lowest sensitivity; LED is blinking faster: medium sensitivity; LED
is blinking very fast: highest sensitivity.
Press SHARE button again to toggle between sensitivity levels signaled with
green LED as described above. When desired sensitivity is chosen, press D-PAD UP
to con rm.
Programming pedals and PADDLES
as the Y axis
Press simultaneously and hold for 3 seconds SHARE and OPTION buttons.
When green LED is lit in center of wheel, release buttons.
Press LEFT on wheel D-PAD. After green LED is o - pedals are programmed as Y-axis.
Press RIGHT on wheel D-PAD. After green LED is o - gear paddles are programmed
as Y-axis.
Clear all buttons assignment
Press simultaneously and hold for 3 seconds SHARE and OPTION buttons.
When green LED is lit in center of wheel, release buttons.
Press and hold for 4 seconds OPTION button. When LED is o , default functions are restored.
Note: after device restart, all functions revert to default settings.
general
The safe product, conforming to the EU requirements.
The product is made in accordance with RoHS European standard.
The WEEE symbol (the crossed-out wheeled bin) using indicates that this product in not
home waste. Appropriate waste management aids in avoiding consequences which are
harmful for people and environment and result from dangerous materials used in the
device, as well as improper storage and processing. Segregated household waste
collection aids recycle materials and components of which the device was made. In order
to get detailed information about recycling this product please contact your retailer or a
local authority.
EN
PL
DE
ES
CZ
SK
RO
HU
BG
RU