Setup And Operation - Honeywell Home DC515 Serie Guía De Instalación Y Funcionamiento

Overview
Just follow these simple steps:
1. Install the push button battery. Depending on the model, plug in the
doorbell or install the batteries in it.
2. Set up the doorbell and your preferences.
3. Install the push button.
Doorbell for indoor use only. Do not expose to liquid, vapour or rain.
Power-up
1. Choose an outlet location that is not near a heat
source, where the doorbell will be easy to see and
hear and power it.
2. Open the push button battery cover and install the
CR2032 battery.

Setup and Operation

Press the push button to test whether it is paired with the doorbell. The
doorbell will light up and ring. If it does not, see "Connect a Push Button" on
page 7.
Change the Light Pattern
Press the Sunlight button to change the lights that flash
when the doorbell rings.
Press the Sunlight button
1 time
Halo light and
top lights
2 times
Halo light only
3 times
Top lights only
2
+
4 times
No lights