Honeywell Home DC515 Serie Guía De Instalación Y Funcionamiento página 8

Maintenance
Your doorbell and push button require no maintenance except to periodically
change the battery.
If using the correct battery, its life should be approximately:
• Up to 2 years for the push button; replace with CR2032 lithium battery
Low Battery Notification
When the push button batteries are low, two beep sounds are heard after the
normal tune.
When the batteries are low on the portable doorbells (battery models), the
bottom edge of the halo light flashes yellow every 6 seconds until the batteries
are replaced.
Reset
This process removes all pairings, including the push button that came with
this doorbell:
1. Unplug the doorbell or remove the batteries from the portable model.
2. Press and hold the Setting button and plug the doorbell back in at the
same time.
3. The halo light will circle and the doorbell is returned to its default factory
settings.
8