Axis Q6032-C Guia De Instalacion página 16

Page 16
4. Strip the multi-connector cable. Make sure all three shields are intact.
Shield
15 mm (0.6")
5. Connect the network and I/O wires to the internal network and I/O connectors; open the lid,
insert the wires and close, see the illustration and table above for proper wiring.
6. Connect the ground and power wires to the power connector (DC output), see the illustration
and table above for proper wiring.
I/O connector
(internal)
AXIS Q6032-C/Q6034-C/Q6035-C Installation Guide
Shield (2x)
10 mm (0.4")
Ethernet connector
(internal)
1 Red
1
2 Blue
2
3
3 Green/white
4
4 Green
5
5 Orange/white
6
6 Orange
7
7 Yellow
8
8 Black
9
9 Red
Shield
2
7
3
5
4
6
Ethernet connector
(internal)
Power
Digital Input
Ethernet
Ethernet
Ethernet
Ethernet
Digital Output
Ground
Power
Clamp
1
9
8
Power connector
(DC output)