Hitch Pin; Ring Pin; Tine - Snapper XD SXDC82 El Manual Del Propietario

ASSEMBLY
INSTALLING THE TINES CORRECTLY (See Figure 5)
NOTE: when the tines are installed correctly, the flute on the tines should line-up, and the angled edge of the tine blades
should point towards the ground. The cultivator will not operate properly if the tines are not installed correctly. If there is a
problem with the cultivating operation of the cultivator, check the tines for proper positioning. The directional arrow that is
displayed on each tine should point toward the front.

RING PIN

RING PIN
TINE (A)
GEAR BOX
TINE (D)
TINE (B)
Fig. 5
TINE (C)
INSTALL TWO TINES FOR TILLING A NARROW AREA (See Figure 6)
1. Place tine (B) onto the shaft, and place tine (C) onto the other side shaft.
2. Insert the hitch pins into the holes in order to secure the tines to the tine shaft.

HITCH PIN

TINE (C)
TINE (B)
Fig. 6
11