Lighting Instructions - RST Portofino ULC-FRS56-J-E Serie Manual De Instrucciones

LIGHTING INSTRUCTIONS - Make sure the propane tank valve is open before
proceeding. Improper lighting procedures may cause potential consequences.
Step 3.
1. To ignite, push the regulator knob forward and turn one quarter turn
counter clockwise to the "low" position.
2. With the valve depressed, push the igniter button to make the pilot
burner fire. Once the pilot burner is fired, hold down the valve for over
ten seconds to prevent the pilot burner flame from extinguishing, then
release it.
3. To lower the flame once fired, turn the valve without pushing it. To
increase the flame, push the valve in and turn it counter clockwise toward
the high fire. If the flame is not in a stable condition (making noise, flame
swaying, etc.), please turn it off immediately and call RST Brands.
3