Adjust The Volume; Aux Operation - Saba JULY CI Manual De Instrucciones

Adjust the Volume

– Press the VOL +/– buttons on the main unit or on the remote control to adjust the volume�
– If you wish to turn the sound off, press the MUTE button on the remote control� Press the MUTE
button again or press VOL +/– button to resume normal volume�
Select the Equalizer
Press the EQ button on the remote control repeatedly to select: [Pop] - [Classic] - [Jazz] - [Rock]
Adjust the Brightness
Press the DIMMER button on the remote control to select brightness level�
Set the Clock
Manual Setting the clock can only be done in STANDBY mode�
1 In STANDBY mode, press and hold the CLOCK button on the remote control until the hour digits
are flashing�
– Press the button on the main unit to select 12/24 hour format�
2 Press the / buttons on the remote control to adjust the hour digits while flashing, then
press CLOCK button on the remote control to confirm, then the minute digits will flash�
3 Press the / buttons on the remote control to adjust the minute digits while flashing, then
press the CLOCK button on the remote control to confirm�
– Each activated state will be cleared if any buttons are not pressed within 15 seconds�
• Time Display
GB
– Press the CLOCK button to show the current time on the display for a few seconds�
• Synchronization the Clock
When in STANDBY mode, press and hold the L/MENU button on the remote control to synchronise
the clock� Press the / buttons on the remote to switch the clock synchronization modes:
RDS Only synchronize with the RDS radio station�
OFF Turn off the clock synchronization function, only adjust the clock manually�
Then press the button on the remote control to confirm�
Set the alarm Timer
– The clock must be correctly set for the timer to operate correctly�
1� In STANDBY mode, press and hold the TIMER/SLEEP button on the remote control until the
hour digits flash on the display�
2� Press the / buttons on the remote control to adjust the hour digits, and then press the
TIMER/SLEEP button on the remote control to confirm, the minute digits will flash on the display�
126
3� Press the / buttons on the remote control to adjust the minute digits, and then press the
TIMER/SLEEP button on the remote control to confirm, the tuner timer will flash on the display�
4� Press the / buttons on the remote control to select BUZZER, DISC, USB or FM mode, and
then press the TIMER/SLEEP button on the remote control to confirm, the display will show the
volume level�
5� Press the / buttons on the remote control to adjust the volume, and then press the
TIMER/SLEEP button on the remote control to confirm, the display will show the selected timer
and " " will flash on the display�
• Activate and Deactivate the Alarm Timer
– Press the TIMER/SLEEP button on the remote control to view the alarm settings or activate
the alarm�
– The alarm is active when " " is shown in the display on the front of the unit�
– To deactivate the alarm, press the TIMER/SLEEP two times� The " " will disappear from the
display on the front of the unit�
– To activate the alarm, press the TIMER/SLEEP two times� The " " will show from the display
on the front of the unit�
• Stop Alarm Ring
– When the alarm rings, press the button on the remote control or on the unit� The alarm stops
but the alarm settings remain�
Set the Sleep Timer
This unit can switch to standby automatically after a set period of time�
1� Press the TIMER/SLEEP button on the remote control repeatedly to select your desired number
of minutes� The number of minutes shown will display in this sequence:
SLEEP 90 SLEEP 60 SLEEP 30 SLEEP 15
2� Stop pressing the SLEEP button when your desired number of minutes is displayed� The sleep
timer is now set�
– Press the SLEEP button to view the remaining time before switch off�
– To cancel the sleep timer, press the SLEEP button repeatedly until "SLEEP 00" shows on the display�

AUX operation

– Ensure that the unit is connected to the TV or audio device�
1� Press the button on the main unit or press the BT/AUX button on the remote control to
select AUX mode�
2� Operate your audio device directly for playback features�
3� Press the VOL +/– button to adjust the volume to your desired level�
GB
SLEEP 00
127