Cd/Usb Operation - Saba JULY CI Manual De Instrucciones

CD/USB operation

CD Operation
icon repeatedly on the unit or press the CD
1� Tap the
button on the remote control to select DISC mode�
2� Tap the button on the unit or press the
on the remote control and the disc tray will open
automatically�
3� Place the CD/MP3 disc with the label side up into the
CD compartment, and then tap the
unit or press the button on the remote control to close the disc tray�
– The total number of tracks will be shown on the display, and unit will play the first track on the
CD/MP3 disc automatically�
– If there is no disc or the disc can't be read, "NO DISC" will show on the display�
USB Operation
1� Insert the USB device�
2� Press the button on the main unit or press the USB
button on the remote control to select USB mode�
Play Control
GB
– To stop play, press the L button on the remote control� The total tracks of the CD will show on the
display�
– To pause or resume play, press the
control�
– To skip to the previous/next track, press the
control�
– Press and hold the / buttons on the unit or on the remote control to perform fast
forward/ reverse playback� Release the button to resume normal playback�
Random Playback
• During play, press the SHUFFLE button, unit will randomly play the song�
128
button
button on the
button on the unit or the /PAIR button on the remote
/ buttons on the unit or on the remote
Intro Playback
• Press the INTRO button on the remote control� The unit will play the first 10 seconds of each track�
• Press the INTRO button on the remote control again to resume normal playback�
Select repeat play options
1� Press the REPEAT button repeatedly on the remote control to select Repeat play modes� The
selected mode will show on the display�
– RPT ONE: Repeat current track� " " blinks�
– RPT ALB: Repeat folder (only for MP3/WMA Playback)� "
– RPT ALL: Repeat all tracks� "
" lights up�
– RPT OFF: Repeat turned off�
Programme Setting
The user can programme up to 20 tracks in CD/USB mode in any desired order� Programme mode is
activated while in STOP mode�
1� Press the L button on the remote control�
2� Tap the PROG button on the remote control to enter MEMORY mode�
/
3� Press the number (0~9) buttons or
select the track that you want to preset, then press PROG button to confirm�
4� Repeat step 3 to programme more tracks�
5� Press the button to playback programme tracks�
Note:
– If you want to change the programed files, press the L button two times to clear the current
program files, display shows «PRG CLR», then repeat the program steps as above to re-enter the
new program files�
– Or opening the CD door to clear the current program files�
About the Discs
Do not move the unit during playback
– During playback, the disc rotates at high speed�
– Do not lift or move the unit during playback, as doing so may damage the disc or the unit�
When moving this unit
– When changing places of installation or packing the unit for moving, be sure to remove the disc
and return the disc tray to its closed position in the player� Then, press the power switch to turn
the power off before disconnecting the power cord� Moving this unit with the disc loaded may
result in damage to this unit�
" blinks�
buttons on the remote control or on the unit to
GB
129