Maintenance And Storage - Jimmy WB55 Manual De Usuario

Brushroll cleaning and installation
Turn off the machine and unplug the power cord, rotate the right lock knob anticlockwise with hand
from locked position to unlock position (Figure 9) to remove the brushroll to clean up(Figure 10).
After brushroll cleaning,insert brushroll from the hole on the right. Make sure the left plug of
brushroll be fully snapped into the belt(according to Figure 11) to lock brushroll on the window.
Otherwise,the brushroll cannot be locked.
Notice:
for safety reasons, please turn off the machine and unplug power cord before cleaning brushroll.

Maintenance and storage

Please clean dust cup and filter after each use for further use. It is recommended to replace a filter
after 30-50 hours of working time(depending on specific situation) for better use.
6
Figure 9
Turn the brushroll manually to
assist the brushroll to enter
Figure 11
Figure 10