Product Specifications - Ingersoll Rand JH40 Jackhamer Especificaciones Del Producto

Rock Drill Oil Specifications
Characteristic
Viscosity:
SUS at 100°F (38°C)
SUS at 210°F (99°C)
cST at 104°F (40°C)
cST at 212°F (100°C)
Pour Point, °F (°C) Max.
Flash Point, °F (°C) Max.
Viscosity Index, Min.
Steam Emulsion No. Min.
Consistency
Falex Load Test lbs. (kg) [Min.]
Timken E. P. Test lbs. (kg) [Min.]

Product Specifications

Bore of
Model
Cylinder
I.D. inch (mm)
JH40C1 2.5 (63.5)
JH40C2 2.5 (63.5)
JH40C3 2.5 (63.5)
Model Weight (Net)
I.D. lbs (kg)
JH40C1 61 (27.7)
JH40C2 61 (27.7)
JH40C3 61 (27.7)
Operation
Do not operate the jackhamer when the drill bit is not against the work.
•
Never strike the tool with a blunt object; the housing may be broken or damaged.
•
Never attempt major maintenance of the tool on the job; take it to a repair shop.
•
• Never drag the tool along the ground; the air ports in the exhaust may fill with dirt.
51985323_ed4
Test Procedure
ASTM-D2161
ASTM-D2161
ASTM-D445
ASTM-D445
ASTM-D97
ASTM-D92
ASTM-D2270
ASTM-1935-65
---
ASTM-D2670
ASTM-D2782
Working Chuck Size
Stroke Hex.
inch (mm) inch
2-5/8 (66.7) 7/8 x 3-1/4
2-5/8 (66.7) 7/8 x 4-1/4
2-5/8 (66.7) 1 x 4-1/4
Overall Length
inch (mm)
22.5 (572)
22.5 (572)
22.5 (572)
CAUTION
90°F and Below
(32°C and Below)
175 Min.
46 Min.
37 Min.
6 Min.
-10°F (-23°C)
370°F (188°C)
90
1200
Stringy
2000 lbs. (907 kg)
30 lbs. (14 kg)
Air Consumption at
Blows
per
Minute
ft
3
2000
2000
2000
Recommended Air Supply at the Inlet
psig
90 - 100
90 - 100
90 - 100
EN
Above 90°F
(Above 32°C)
450 Min.
65 Min.
105 Min.
11 Min.
-10°F (-23°C)
400°F (204°C)
90
1200
Stringy
2000 lbs. (907 kg)
30 lbs. (14 kg)
90 psi (6.2 bar)
/min. m /min.
3
115 3.25
115 3.25
115 3.25
bar
6.2 - 6.9
6.2 - 6.9
6.2 - 6.9
EN-3