Rear Panel - M-Audio M-TRACK PLUS MKII Guia Del Usuario

Rear Panel

3
1. USB Port: This connection will allow you to send audio to/from a computer. Use a USB
cable to connect the M-Track Plus to a computer. The M-Track Plus requires a USB 2.0
connection.
2. Main Outputs L and R: Use standard 1/4" (6.35 mm) TRS cables to connect these
outputs to your powered monitors, an amplifier system, etc. Their levels are controlled by
the Monitor Level knob.
3. Kensington Lock Slot: You can use this Kensington lock slot to secure M-Track Plus to
a table or other surface.
2
1
2
5