Start-Up; Attach Front Panel; Detach Front Panel; Operation - Clatronic AR 815 USB/CR Manual De Instrucciones

Ocultar thumbs Ver también para AR 815 USB/CR:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
Use the threads on the side of the casing (A) to mount the unit on
the vehicle bracket (supplied with your car). The holes are marked
with T (for Toyota) and N (for Nissan).
D
B
C
Loosen the mounting screws for the hooks left and right at the
front of the unit and remove the hooks.
Mount the brackets (B) with screws on the unit (D).
Connect External Audio Device
Connect line out of the external audio device to
jack on the front panel.
Select playback mode for external device by repeatedly press-
ing MODE (21) until AUX is displayed.

Start-up

To protect against theft remove the front panel. Do not keep the front
panel in the car.
NOTE
Keep the front panel in its casing.
Do not touch the contacts on the unit or on the front panel.
All manuals and user guides at all-guides.com
A
B
AUX IN (11)
This chapter gives important operating instructions for the unit.

Attach Front Panel

Place the front panel with its right side in the frame.
Now press the left side until it locks in place.
Ensure the front panel is attached properly. If the front panel is
not attached properly this can cause malfunctions.

Detach Front Panel

Press unlock button (A) for the front panel and remove the
front panel (B).
A

Operation

NOTE
If no button is pressed for 5 seconds or no setting is made,
then the unit returns to the previous mode. Changed settings
are saved.

On/Off

Press the button
(1) to switch on the set. The display is
activated.
Press
(1) to turn the unit off.
B
71

Publicidad

Tabla de contenido
loading

Tabla de contenido