Replacement Fuses - Jensen A34XP Manual De Instalación Y Funcionamiento

A34XP & A46XP
Wiring
Power
Power Terminal (+12V)
Connect directly to the vehicle battery positive (+) terminal with a minimum of 10-gauge wire.
Remote Terminal (REM)
Connect the power antenna or amplifier turn-on lead from the receiver to the amplifier remote terminal.
Ground Terminal (GND)
Connect to a good chassis ground. The ground connection should be to clean, unpainted metal to provide a good electrical connection. Ground wire should be kept as
short as possible.

Replacement Fuses

Use only blade-type fuses.
Power Terminal (+12V)
Terminal Eléctrica (+12V)
Borne électrique (+ 12V)
Remote Terminal (REM)
Terminal Remota (REM)
Borne à Distance (REM)
A34XP
5
Fuses
Fusibles
Fusibles
Ground Terminal (GND)
Terminal a Tierra (GND)
Borne à Terre (GND)
A46XP