Jensen A34XP Manual De Instalación Y Funcionamiento página 7

A34XP & A46XP
Wiring (continued)
Speaker Wiring
The Speaker Wiring diagrams illustrate the following four options for connecting speakers and
subwoofers to the AXP amps:
• 2 Speakers
• 2 Subwoofers
• Bridged Subwoofer
• Tri-Mode
Note: When running a subwoofer and two full-range speakers together (tri-mode
operation), high and low pass filters must be used. Failure to install these filters may
cause damage to the amplifier and/or the speakers.
2 Speakers
2 Autoparlantes
2 Haut-Parleurs
2 Subwoofers
2 Autoparlantes de Sonido Graves
2 Subwoofers
Frequency
Hz.
2 Ohms
L C
80 4.1mH 1000FF
100 3.1mH 800FF
130 2.4mH 600FF
200 1.6mH 400FF
250 1.2mH 300FF
400 0.8mH 200FF
600 0.5mH 136FF
800 0.41mH 100FF
1000 0.31mH 78FF
1200 0.25mH 66FF
1800 0.16mH 44FF
4000 0.08mH 22FF
Bridged Subwoofer
Sonidosbajos en Puente
Subwoofer En Pont
7
Speaker Impedance
4 Ohms 8 Ohms
L C L
8.2mH 500FF 15mH
6.2mH 400FF 12mH
4.7mH 300FF 10mH
3.3mH 200FF 6.8mH
2.4mH 150FF 4.7mH
1.6mH 100FF 3.3mH
1.0mH 68FF 2.0mH
0.82mH 50FF 1.6mH
0.62mH 39FF 1.2mH
0.51mH 33FF 1.0mH
0.33mH 22FF 0.68mH
0.16mH 10FF 0.33mH
Tri-Mode
Tri-Modo
Tri-Mode
C
250FF
200FF
150FF
100FF
75FF
50FF
33FF
26FF
20FF
16FF
10FF
5FF