Kobalt KMP 2180B-06 Manual De Instrucciones página 13

ASSEMBLY INSTRUCTIONS
WARNING
• If any parts are damaged or missing, do not operate this product until the parts are replaced. Us-
ing a product with damaged or missing parts could result in serious personal injury.
• Do not attempt to modify this product or create accessories not recommended for use with this
product. Any such alteration or modification is misuse and could result in a hazardous condition
leading to possible serious personal injury.
• Do not insert battery until assembly is complete and you are ready to mow. Failure to comply
could result in accidental starting and possible serious personal injury.
• To prevent accidental starting that could cause serious personal injury, always remove the battery
pack from the product when assembling parts.
• Never operate the mower without the proper safety devices in place and working. Never operate
the mower with damaged safety devices. Operation of this product with damaged or missing parts
could result in serious personal injury.
WARNING
Folding or unfolding the handle improperly can damage the cables, causing an unsafe operating
condition.
• Do not damage the cables when folding or unfolding the handle.
• If a cable is damaged, contact an Authorized Service Dealer.
1a. Unfolding and adjusting handle
Pull and rotate the handle lock knobs (F) 90° on both
sides to loosen the lower handles (N) on both sides.
Move the lower handles to the operating position.
You may raise or lower the handles to a position
comfortable for you. There are 3 positions for you
to choose. Release the handle knobs to lock the
lower handles into position.
Note: Ensure both sides are set at the same position
for proper assembly.
1b. Installing upper handle:
Align the mounting holes on the upper handle (E) and
the lower handle (N). Insert the handle bolts (AA) and
secure using the handle knobs (BB). Repeat for both
sides.
1a
Unlocked position Locked position
1b
N
13
N
F
E
AA
BB