Connecting The Dvd To A Tv Using The Video Output Jack; Connecting The Dvd To A Tv Using The S-Video Output Jack - memorex MiHT5005 Guía Del Usario

CONNECTING THE DVD TO A TV USING THE VIDEO OUTPUT JACK

CONNECTING THE DVD TO A TV USING THE S-VIDEO OUTPUT JACK

NOTES:
• If your TV has a HDMI input, connect the DVD player with the HDMI cable for best results, otherwise use the Component,
S-Video or Video OUT jack on the DVD player.
• Set the TV's TV/VIDEO button or switch to the VIDEO setting.
• When connecting the DVD, refer to the owner's manual of the TV, as well as this manual.
• When connecting the DVD to the TV, make sure the power is off and both units are unplugged before making any
connections.
• Connect the DVD player to your TV directly. If you connect the DVD player through a VCR, the playback picture will be
distorted because DVD video discs are copy protected.
• For the Video setting, please refer to page 18.
CONNECTION (CONTINUED)
Video Cable (Included)
From
Video Out
S-Video Cable (Not Included)
From
S-Video
Out
11
To
Video In
To S-Video In