Programmed Playback - memorex MiHT5005 Guía Del Usario

PROGRAMMED PLAYBACK

The DVD player in this unit has a 16 chapter programmable memory that allows you to program up to 16 chapters on any disc
for playback in any desired order. You may program 16 different chapters or you may also program certain chapters to play
more than once. To perform Programmed Playback, proceed as follows
1
During playback of a DVD disc, press the PROGRAM
button; the Program menu will appear on the TV screen.
3
1
Repeat step 2 until all desired chapters have been
programmed (up to 16). Use the Navigation (√,®,π,†)
buttons 1 to select "PLAY" at the bottom of the Program
menu; then press the ENTER button 2 to begin
Programmed playback. Playback will begin on the first
chapter that you programmed and the player will continue
to play all of the chapters that you programmed in the order
in which you programmed them. After all programmed
chapters have been played, the unit will stop automatically.
DVD BASIC OPERATION (CONTINUED)
2
:
2
Select the first title and chapter to be played back using the
Number (0-9) buttons 1. Use the Navigation (√,®,π,†)
buttons 2 to move the cursor.
NOTE: To enter a title or chapter number larger than 9,
press the +10 button to enter the first digit (i.e. for
title/chapter 15, press the +10 button once, "10" will
appear, then press the Number 5 button; for title/chapter
22, press the +10 button twice, followed by pressing the
Number 2 button, etc.).
4
TO CLEAR ALL THE PROGRAMS:
Use the Navigation (√,®,π,†) buttons 1 to select
"CLEAR" at the bottom of the Program menu; then press
the ENTER button 2.
31
1
2
1
2