Imesa IM9 Instruciones De Utilizo página 15

E021001C
MESSAGGE
It
programme
END completed. The door can be
opened in order to take out the
linen.
It appears by pressing the
START key; the display will
H2O
show it all the time when the
key is pressed.
It appears by selecting the no
NO SPIN spin function. It disappears by
ending of this function.
It appears during the soaking
PAUSE function. It disappears by new
starting of the cycle.
It appears when there was a
lack of power supply during a
PF programme. To restart wait for
the writing PF stops to lighten,
then press START
It appears when the machine
OPENING
must be loaded with the linen
DOOR
and the door is open.
It
PR 1 ... PR 6 programme and the machine
can start running.
It
SELECT PROG loading and a programme must
to be selected.
This alarm is displayed when it
is necessary to proceed with
MAINTENANCE
the usual maintenance. Please,
call your service referent.
All 4 dots lit if inverter is
blocked.
• • • • automatically carried out. If
alarm occurs too often, call for
↑ ↑ ↑ ↑
assistance.
1st dot is lit when at least 3
•
unbalance has occurred.
↑
2nd
•
temperature probe fail occure.
↑
3rd do twill lit when finish the
• temperature wdt (max time to
complete the heating phase).
↑
• 4th dot is lit when heating is on.
↑
MEANING
appears when
has
appears by selecting
appears after machine
Unlocking will
dot is lit when
18. PRESSOSTAT GAUGING
In case of pressostat malfunctioning (wrong
reading of the water level in the drum), it can be
the
gauged.
been
To gauge it, follow this procedure: switch on the
machine, open the door, no water and linen in the
drum, machine in stand by, press together the
button "PR 5" e "PR 6". On the display is written
"GAUGING". Press "START" and the gauging is
achieved. Switch off the machine.
a
be
a
15
07/10/02