Resetting The Tv; Setting The Sleep Timer; Using The Audio Output Jacks - Sanyo AVM-3259G Manual Del Propietário

RESET TING THE TV
Press the RESET key to automatically reset the television to factory settings. These
features will automatically reset:
• Picture/Sound Adjustments: Color, Tint, Contrast, Brightness, Sharpness, Color
Enhancer, Bass, and Treble
• Channel Memory
• Audio to Stereo
• Initial Channel to OFF
• Caption to OFF
• V-Guide to OFF
•
Language to English
• Clock and Sleep Timer (if previously set)
If desired, personal settings can be made again
using the menu options.

SETTING THE SLEEP TIMER

The Sleep Timer will switch off the TV automatically.
1. Press the SLEEP key.
2. Use the 0 key to select the desired time
(from 30 minutes up to 3 hours).
Note: The Sleep Timer cancels
when the TV is turned off
or if a power failure occurs.

USING THE AUDIO OUTPUT JACKS

CONNECTING A STEREO AMPLIFIER
TO AUDIO OUT JACKS
1. Connect the TV Audio Output (R/L)
Stereo Amplifier In (R/L)
2. Press POWER to turn on the TV. Turn on
external equipment also.
begin channel search
VCR
INPUT
1
1
4
4
7
7
CAPTION
MENU
UHF/VHF/CATV
75Ω
to the
.
Press RESET key
again to return
factory preset and
TV AUX
POWER
RESET
2 3
2 3
5 6
5 6
8 9
8 9
SLEEP
0
0
RECALL
S-VIDEO IN -1
AUDIO
AUDIO
OUTPUT
VIDEO (MONO)
VIDEO
R AUDIO L
INPUT
1
L
AUDIO
R
VIDEO
INPUT
R AUDIO L VIDEO
2
(MONO)
Back of TV
QuickTips
Make sure all cable
connectors are fully
seated on jacks.
Always match cables
according to the
colors; for right
RED
audio and
WHITE
left audio.
Position your TV at
least 2 feet from
stereo speakers.
The magnets in the
speakers may affect
the picture quality.
Do not connect
external speakers
directly to the TV.
Sleep : Clear
Sleep : 3:00
Sleep : 2:30
Sleep : 2:00
Sleep : 1:30
Sleep : 1:00
Sleep : 0:30
Use 0 key
Stereo Amplifier
for
11