Chauvet Professional VIP Manual Del Usario página 2

VIP™ Signal Distributor QRG
About this
Guide
Disclaimer
Safety Notes
Contact
The VIP™ Signal Distributor Quick Reference Guide (QRG) has basic product
information such as connection, mounting, and installation information.
·
You must read ALL the disclaimers and safety notes in this guide
before installing, operating, or maintaining this product.
·
This product contains no user-serviceable parts. Any reference to
servicing in this guide will only apply to properly trained
CHAUVET® certified technicians.
·
Please refer to all applicable local codes and regulations for the proper
installation of the product.
·
Always connect this product to a grounded circuit to avoid the risk of
electrocution.
·
DO NOT operate this product outdoors or in any location where dust,
excessive heat, water, or humidity may affect it.(IP20)
·
The maximum ambient temperature is 122 °F (50 °C). Do not operate
this product at higher temperatures.
·
Do not operate this product if you see damage on the housing or
cables. In any of these cases, have the damaged parts replaced by an
authorized technician.
·
Do not open or modify the product.
·
Make sure this product is connected to the proper voltage provided in
this guide's specifications and/or the specification sticker on the
product.
·
Do not run this product near magnets, TV, or transformers.
·
Never try to repair this product. Repairs carried out by unskilled
people can lead to damage or malfunction. Please contact
CHAUVET® Technical Support.
·
Any damages caused by manual modifications are not subject to
warranty. CHAUVET® will not accept liability for any resulting
damages caused by unauthorized modifications or not observing the
safety warnings and instructions in this manual.
·
In the event of a serious operating problem, stop using immediately.
Outside the U.S., United Kingdom, or Ireland, contact your distributor to request
support or return a product. Visit
information.
www.chauvetlighting.com
2
EN
for contact