Safety Warnings - Radiodetection SPX P340 flexiprobe Guia Del Usuario

Still pictures
Press the key at anytime to take still pictures.
Enter job details if required:
• Review Client Name, Site Address and Survey Start and Finish Survey
references by pressing the
press OK again to accept the changes.
• On the keypad, press the
in jpeg format.
You can take screen captures in recording, playback and general inspection
modes. Note that screen captures will also record any on-screen text,
excluding the menu.
Video playback and photo review
To browse your Compact Flash card or USB flash drive, press the video
key on the keypad.
The card browser will open; use the
you wish to view and then press OK or video
Video Playback or Photo review will begin immediately.
You can pause or stop video playback at anytime using the
keys.
You can stop reviewing a photo by pressing the
To Fast-Forward press the arrow key during playback. To resume normal
playback speed, press the video
To Rewind press the arrow key during playback. To resume normal
playback speed, press video .
During playback, you can adjust the sound volume at anytime by pressing
F1 or F2.
Storing your Jobs onto your PC
If you have used a USB flash drive connect this to a spare USB port of your
PC and go to step 4.
Or:
If you have used a CF card:
1 Switch the controller off.
2 Connect the USB cable to the unit and to your computer.
3 Your computer will recognize the unit as a Mass Storage Device.
4 Start FlexiSight manager.
5 Press the Import Button.
6 Select the Removable Disk in which your Jobs are stored.
7 Press OK.
For more information, please refer to the Operation Manual available in the
FlexiSight Manager CD or to download from the Radiodetection website.
and keys. Press OK to Edit and then
key to capture a picture of the screen
and arrows to navigate to the file
.
or keypad
key or pressing
key.
10
the system is not earthed. if mains operated equipment is connected
to the system then the external equipment must be earthed in
accordance with the manufacturer's instructions. Failure to comply
with this may cause the unit to become live and be a lethal hazard.
DO NOt USe the P340 flexiprobe system in potentially explosive
environments. this equipment is NOt approved for use in hazardous
Locations.
Pushrod reels are heavy. Use the wheels (P342 and P343 models) to
assist transport. Observe heavy-lifting safety practices when lifting
the reel.
Foul water systems can be a source of biological hazards. Wear
appropriate protection when handling the P340 controller and the
pushrod reel and camera.
the camera will get hot during use. this is normal. exercise care when
handling the camera at all times.
Maintenance
.
Clean and sanitize the P340 flexiprobe system at regular intervals and after
conducting an inspection.
The P340 flexiprobe system contains no user serviceable parts; do not
dismantle any component of the P340 flexiprobe system, including the
controller, reel and camera.
Pearpoint recommends that only authorized service centers carry out
service of this product. Service elsewhere will invalidate the manufacturer's
warranty.
For information regarding any service needs, please visit:
www.radiodetection.com or contact your local Pearpoint representative
or dealer.
Training
Pearpoint provides training services for most Pearpoint products. Our
qualified instructors will train equipment operators or other personnel
at your preferred location or at Pearpoint headquarters.
For more information go to www.radiodetection.com or contact your
local Pearpoint representative.

SaFETy waRNINGS

11