Software Update; Maintenance; Keep It Sharp; Rotate And Flip The Blades - Worx LANDROID M Manual Del Usuario

6.

Software update

®
Your Landroid M software can be updated when new versions become available. The software version will be displayed in
the diagnosis page by pressing button 2 on homepage. The latest software can be downloaded from our website www.
worxlandroid.com. See the detailed guideline on download page.
The manual in box is based on the default software in the mass production. Some new features/functions in the new
version may not exist in the manual. If you found some settings not in the manual, please visit www.worxlandroid.com to
download the latest manual.
7.

Maintenance

®
Your Landroid M needs to be checked from time to time. The
®
Landroid M works hard and after time needs a good cleaning as well
as having some parts replaced, as they can become worn.
In the following we want to let you know how to take care of your
®
Landroid M.

7.1 Keep it sharp

WARNING: Before cleaning, adjusting, or replacing
the Blades, turn your Landroid
protective gloves.
WARNING: When fitting new blades, make sure
you replace ALL the blades. Always use new screws when fitting blades. This is important to
ensure blade retention. Failure to use new screws could cause serious injury.
®
The Landroid M does not cut grass like other mowers. Its Cutting Blades (14) are razor sharp on all 4 edges and spin in
both directions for maximum cutting capacity (See Fig. J). Each blade of your Landroid
on the frequency the Landroid
12
new cutting edge. If your Landroid
rotated monthly for the best mowing results. Each cutting blade will last up to 4 months when it is programmed to mow
every day. When the cutting blades are dull and worn out, they should be replaced with the spare blades provided with
®
your Landroid M. Spare blades are also available at your nearest WORX retailer.
A. Rotate and flip the blades
®
Your Landroid M carries the Blades that are all screwed onto the Blade Turning Disc (13). The Blades allow the
®
Landroid M do its job and need care and attention. Every once in awhile, you should simultaneously rotate and flip all
blades for a perfect cut. When rotating and flipping the Blades, make sure all the Blades are adjusted at the same time
or else it could make the Blade Disc off balance. If your Landroid
should last one season if they are rotated and flipped every month. Always check to see if the Blades are chipped or
damaged and replace them if they are.
B. Replace the blades (See Fig. K)
After some time, usually every season, your Landroid
will need to be replaced. Your Landroid
while using Blades of different age and quality. So when replacing
the Blades, make sure to replace all of them at the same time. You
can replace them with one of the three spare Blade kits and extra
Blade screws supplied with your Landroid
Before attempting to replace your Landroid
power off and put on protective gloves. Then follow these steps:
1. Gently flip the Landroid
2. Remove the battery cover and remove the battery.
3. Take the screws off the Blades with a screwdriver.
4. Firmly screw on the new Blades.
5. Refit the battery and the battery cover.
IMPORTANT: After screwing the Blade to the Blade Disc,
make sure the Blade is able to spin freely.
Lawn Mowing Robot
®
M OFF and put on
®
M mows your lawn, the cutting blades will need to be flipped/rotated periodically for a
®
M is programmed to mow the lawn every day then the cutting blades will need to be
®
M's Blades
®
M does not like mowing
®
M.
®
M's Blades, turn the
®
M over.
1
3
J
®
M has 4 cutting edges. Depending
®
M mows on a normal schedule (daily) then the Blades
K
2
4
EN