Intended Use; Safety; Electromagnetic Fields; Danger Due To Electrical Current - Silvercrest BABYTALKER 1030 Manual De Usuario

Babytalker 1030
3.3

Intended use

This device is designed only for non-commercial use in monitoring babies in enclosed spaces. Any use that
differs from this or goes beyond the specified use is regarded as incorrect.
WARNING
Danger due to incorrect use!
Incorrect use of the device, or using it for purposes for which it was not designed, can lead
to danger.
• Follow the instructions for use given in this manual.
Claims for damages of whatever kind as a result of incorrect use will not be accepted.
The user bears the sole risk.
4

Safety

This chapter contains important safety information regarding the use of the device.
This device meets the safety requirements laid down. However, inappropriate use can cause injury
and material damage.
4.1

Electromagnetic fields

WARNING
Academic studies on potential health risks associated with high and low-frequency
electromagnetic fields to date have been unable to find any direct relationship between cause and
effect. However, some studies highlighted some potential health risks. As a precaution, therefore,
all technical equipment should be used in such a way as to minimise high and low-frequency fields,
especially for babies and toddlers who are particularly sensitive.
4.2

Danger due to electrical current

DANGER
Danger to life due to electrical current!
Contact with live cables or components can cause danger to life!
Follow the safety instructions given below in order to avoid danger due to electrical current:
• Use only the power supply components included in the pack, as otherwise devices could
be damaged.
• Do not use the device if the power supply unit, cable or plug are damaged.
• Never open the power supply unit housing. There is a risk of electric shock if live connections
are touched or the electrical and mechanical structure of the device are altered.
• Protect devices from humidity, penetration by liquids and dust. Unplug the power supply
unit immediately if the device comes into contact with liquid.
• Unplug the power supply unit if a fault occurs, during a storm and before cleaning the device.
• Protect cables from hot surfaces or other hazards and do not constrict them.
51