Special Playback; Rental Playback; Auto Repeat Playback - Sylvania 3819LC El Manual Del Propietario

19-inch color tv/vcr
Tabla de contenido

Publicidad

Make sure ...
Use the remote control for this procedure.
TV/VCR power must be turned on.
Insert a prerecorded tape.
Before playback, follow steps below.

RENTAL PLAYBACK

This function enables you to improve the picture quality
when playing back worn cassettes such as rented tapes.
1
Select "USER'S SET UP"
Press the MENU button.
Press the PLAY/
or STOP/
button to point to "USER'S SET
UP".
Then, press the F.FWD/B button.
2
Set "RENTAL" to [ON]
Press the PLAY/
or STOP/
button to point to "RENTAL".
Press the F.FWD/B or REW/s
button until [ON] appears.
3
Exit the Rental setting
Press the MENU button to return to the TV mode.
4
Start playback
Press the PLAY button to start playback. "RENTAL
PLAYB" appears.
Once you select the Rental mode, it stays in effect
even after you turn off the TV/VCR.
TO CANCEL THE RENTAL MODE
Repeat steps [1] and [2], select [OFF] using the
F.FWD/B or REW/s button. Press the MENU button
to return to TV mode.
If there is a power failure of any kind, the unit will
retain its' memory for this feature.

SPECIAL PLAYBACK

The TV/VCR has the auto repeat function that allows
you to repeat a tape indefinitely without touching the
PLAY button.
ALL REPEAT:
BLANK REPEAT:
NOTE: All buttons except the POWER and STOP
buttons do not work during Repeat Playback. Always
set the Repeat Playback to [OFF] when not using this
function.
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
B
USER'S SET UP
Press the MENU button.
LANGUAGE [ENGLISH]
CAPTION [CAPTION1]
ZERO RETURN
TIME SEARCH
Press the PLAY/
button to point to "USER'S SET
UP".
Then, press the F.FWD/B button.
– USER'S SET UP –
B
RENTAL
[ON]
REPEAT PLAY
[OFF]
AUTO RETURN
[OFF]
Press the PLAY/
"REPEAT PLAY".
Press the F.FWD/B or REW/s
button repeatedly until your
desired selection [ALL] or
[BLANK] appears.
Press the MENU button to return to the TV mode.
Press the PLAY button to start the Repeat Play.
"REPEAT PLAY B" appears.
TO CANCEL THE REPEAT PLAY MODE
Repeat steps [1] and [2], select [OFF] using the
F.FWD/B or REW/s button. Press the MENU button
to return to TV mode.
If there is a power failure of any kind, the unit will
retain its' memory for this feature.
- 20 -

AUTO REPEAT PLAYBACK

Repeat playback from the beginning to
the end of the tape.
Repeat playback from the beginning
to a blank part, which is blank for more than 10
seconds.
1
Select "USER'S SET UP"
or STOP/
2
Select "ALL" or "BLANK"
or STOP/
3
Exit the Repeat Play setting
4
Start playback
Once you select the Repeat Play mode, it stays in
effect even after you turn off the TV/VCR.
If the Rental mode is set [ON], the "RENTAL
PLAYB" display has priority.
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
B
USER'S SET UP
LANGUAGE [ENGLISH]
CAPTION [CAPTION1]
ZERO RETURN
TIME SEARCH
button to point to
– USER'S SET UP –
RENTAL
[OFF]
B
REPEAT PLAY
[ALL]
AUTO RETURN
[OFF]
EN
7L26

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido