Search; Zero Return; Time Search - Sylvania 3819LC El Manual Del Propietario

19-inch color tv/vcr
Tabla de contenido

Publicidad

Make sure ...
Use the remote control for this procedure.
TV/VCR power must be turned on.
Insert a tape.

ZERO RETURN

This function can search easily a beginning point that
you want to review by rewinding or fast forwarding.
NOTE:
Zero Return WILL NOT work on a blank tape or a
blank portion of a tape.
1
Stop a tape at your desired point
Rewind or fast forward the tape to the beginning point
at which you want to review.
2
Reset the counter to 0:00:00
Press the COUNTER RESET button repeatedly.
3
Begin recording or playback
Press the RECORD or PLAY button.
Press the STOP button when recording or playback is
completed.
4
To activate "ZERO RETURN" mode
Press the MENU button.
Press the PLAY/
or STOP/
button to point to "ZERO RE-
TURN".
Then, press the F.FWD/B
button.
The counter will appear on the
TV screen.
The tape will automatically stop when the counter
returns to 0:00:00.

TIME SEARCH

The Time Search function makes it possible to quickly
advance the tape to your desired position simply by
entering the exact amount of playback time you want to
skip.
NOTES:
Time Search can be set up to a maximum of 9 hours
50 minutes (9:50) by 10 minutes at a time .

SEARCH

In the example below: To watch a program after 2 hour
50 minutes from the present position, in either direction.
Press the TIME SEARCH button (with each push it will
increase by 10 minute)
Press the MENU button.
Press the PLAY/
button to point to "TIME
SEARCH".
Then, press the F.FWD/B button.
Press the PLAY/
button until your desired time
appears. (Example: "2:50"
– M E N U –
stands for 2 hours 50 minutes)
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
If you wish to cancel the Time Search at this point, press
CHANNEL SET UP
USER'S SET UP
LANGUAGE [ENGLISH]
the MENU button.
CAPTION [CAPTION1]
B
ZERO RETURN
TIME SEARCH
By pressing the REW or F.FWD button, the TV/VCR
will rewind or fast forward to the specified point.
The time counts down as the searching progresses.
When 0:00 is reached, the tape will start playback
automatically.
TO CANCEL THE TIME SEARCH at this
point
Press the STOP/EJECT button on the TV/VCR or the
remote control. This will delete the selected time.
- 21 -
This function will not operate in recording mode.
This function is not operative when a cassette tape is
not inserted in the TV/VCR.
1
Insert a tape.
2
Select "TIME SEARCH" mode
OR
or STOP/
3
Enter your desired time
or STOP/
4
Begin Time Search
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
LANGUAGE [ENGLISH]
CAPTION [CAPTION1]
ZERO RETURN
B
TIME SEARCH
TIME SEARCH
2 : 5 0
EN
7L26

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido