Connecting The Module To The Wifi Network; Connection To The Wifi Network Via Bluetooth (Recommended); Connection To The Wifi Network Via Wifi - Bio Bronpi WIFI-1 Instrucciones De Instalación, Uso Y Mantenimiento

6.3 CONNECTING
THE MODULE TO THE WIFI
NETWORK
6.3.1. CONNECTION
TO THE WIFI NETWORK VIA
BLUETOOTH (RECOMMENDED)
Before proceeding, enable
Bluetooth on your Smartphone
and stay close to the wifi module
(within 4-5 m). Then select
CONFIGURE BY BLUETOOTH and
follow the guided procedure:
Select the wifi network in your
home to which you wish to connect
the module, enter the password
for your home router and click on
"connect to the selected network".
6.3.2. CONNECTION TO THE
WIFI NETWORK VIA WIFI
Before proceeding, we recommend
disabling the mobile data option on
your Smartphone and enabling the wifi
option. Then select CONFIGURE BY
WIFI in the application and follow the
guided procedure:
Look at the list of wifi networks that
your phone displays, the wifi network
created by the module and connect to
it, the wifi network created will always
have the prefix T009..... And it ends
with the last 6 characters of the kit's
MAC number.
NOTE: This connection is temporary
and does not allow the use of data, so
when it ends, you will have to leave it
and it is recommended that you delete
from your network list so that your
Smartphone doesn't connect to
it automatically, which will make
impossible that you use data from
your Smartphone as well as the
correct functioning of the application.
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
The module will inform you that it has already been connected and you
must click on "finish" and the screen with the stove you have registered
will appear. In Bluetooth mode, it does not allow you to add another
stove, you must add it from the wifi mode.
it
20 REMOTE CONTROL WIFI1 MODULE