Replacing The Grease Filter For Recirculation Ventilation; Replacing The Charcoal Filter For Recirculation Ventilation; Replacing The Grease Filter For Wall And Roof Ventilation - Whirlpool WML35011KS Instrucciones Del Usuario

Replacing The Grease Filter For
Recirculation Ventilation
Grease Filter:
The grease fi lter is located on the underside of the microwave
oven. The grease fi lter should be removed and cleaned at least
once a month.
1. To remove the grease fi lter, use a Phillips screwdriver to
remove the screw on the grease fi lter.
Grease Filter
Grease Filter screw
2. Hold the left side of the grease fi lter, swing it to the right
position, and remove it from the slotted area.
A B C
A. Bottom Plate
B. Grease Filter and Charcoal Filter
C. Slotted-Area
3. Separate the grease fi lter from the charcoal fi lter.
Grease Filter
4. Clean the grease fi lter monthly, or replace with new grease
fi lter if necessary.
5. Reattach the grease fi lter to the charcoal fi lter.
6. Put the grease fi lter and charcoal fi lter back to the bottom
plate slotted area.
7. Secure the grease fi lter and charcoal fi lter back to the bottom
plate with the grease fi lter screw.
14
MICROWAVE OVEN CARE
Bottom Plate
Charcoal Filter
Replacing The Charcoal Filter For
Recirculation Ventilation
Charcoal Filter:
The charcoal fi lter is behind the grease fi lter at the bottom of the
microwave oven. The charcoal fi lter cannot be cleaned and should
be replaced about every 6 months.
Repeat steps 1 to 3 from the "Replacing Grease Filter For
Recirculation Ventilation".
1. Replace the old charcoal fi lter with a new charcoal fi lter. Attach
it to the grease fi lter.
2. Put the grease fi lter and the charcoal fi lter back to the bottom
plate slotted area.
3. Secure the grease fi lter and the charcoal fi lter back to the
bottom plate with the grease fi lter Screw.
Replacing The Grease Filter For Wall
and Roof Ventilation
Grease Filter:
The grease fi lter is located on the underside of the
microwave oven. The grease fi lter should be removed and cleaned
at least once a month.
1. To remove the grease fi lter. Use a Phillips screwdriver to
remove the screw on the grease fi lter.
Grease Filter
Grease Filter screw
2. Hold the left side of the grease fi lter, swing it to the right
position, and remove it from the slotted area.
A
A. Bottom Plate
B. Grease Filter
C. Slotted-Area
3. Clean the grease fi lter monthly, or replace it with new grease
fi lter if necessary.
4. Reattach the grease fi lter to bottom plate.
5. Secure the grease fi lter back to the bottom plate with the
grease fi lter screw.
Bottom Plate
B C