Insignia NS-30HTV Guia Del Usuario página 15

6 Press or to select TV RATING, then
press or to display the rating you want.
Rating Explanation
OFF TV RATING is not set.
TV-Y Appropriate for all children
TV-Y7 Appropriate for children seven and
older
TV-G General audience
TV-PG Parental guidance suggested
TV-14 Unsuitable for children under 14
TV-MA Mature audience only
When you select TV-Y7, TV-PG, TV-14, or
TV-MA, press -/DISPLAY for a description of
the rating. Press
you want, then press
OFF.
7 Press or to select MOVIE RATING,
then press . The RATING SET menu
opens.
8 Press or to select a rating, then press
or to select ON or OFF.
Rating Explanation
G General audiences
PG Parental guidance suggested
PG-13 Unsuitable for children under 13
R Restricted: Children under 17 require
parent or adult guardian
NC-17 No one under 17 admitted
X Mature audiences only
9 Press MENU twice to return to the LOCKS
screen, then press
10 Press or to select ON. Your settings are
saved in memory.
11 Press EXIT on the remote to return to normal
viewing.
Notes The V-Chip function is activated only on
programs and input sources that have the rating
signal.
The V-CHIP SET (DTV) option will be available for
selection whenever a new rating system for U.S.
digital broadcasting can be received.
To use your TV after your TV is protected:
• When you receive a program that is blocked
by the V-Chip, press MUTE and enter the
password, then press ENTER to view the
program.
When the password is entered correctly, the
protection is temporarily overridden. If your
TV is turned off, or the channel is changed,
the V-Chip restriction is reactivated.
or to select the rating
or to select ON or
or to select V-CHIP.
www.insignia-products.com
To change the password:
1 Press MENU on the remote control or your
TV. The menu screen opens.
2 Press or
LOCKS menu opens.
L O C K S
V- C H I P S E T
F RO N T PA N E L L O C K
N E W PA S S WO R D
: S E L E C T
3 Press or
mode. The LOCKS password screen opens.
L O C K S
PAS S WOR D
[ 0 - 9 ] : S E L E C T
4 Enter your 4-digit password with the number
keys on the remote control and press
ENTER. The LOCKS setup menu opens.
5 Press or
then press or
L O C K S
N E W PAS S WOR D
[ 0 - 9 ] : S E L E C T
6 Enter a new 4-digit password with the
number keys on the remote control, then
press ENTER. The CONFIRM PASSWORD
screen opens.
7 Enter the same password, then press
ENTER. The password is changed.
8 Press EXIT on the remote to return to normal
viewing.
Setting the front panel lock
You can lock the front panel buttons to prevent
your settings from being changed accidentally.
When the front panel lock is ON, all control
buttons on the TV front panel (except POWER)
will not operate.
To lock or unlock the front panel:
1 Press MENU on the remote control or your
TV. The menu screen opens.
to select (LOCKS). The
: A D J U S T
to enter the password entering
E N T E R : S E T
E X I T : E N D
to select NEW PASSWORD,
.
E N T E R : S E T
E X I T : E N D
13