Troubleshooting - Insignia NS-30HTV Guia Del Usuario

3 Press or
then press or
opens, showing you the digital signal
strength.
SIGNAL METER
CHANNEL (DIGITAL)
4 Press EXIT on the remote to return to normal
viewing.
• The signal meter feature is not available
Notes
for analog channels.
• After 240 seconds, the SIGNAL METER
screen returns to normal TV operation
automatically.

Troubleshooting

Use the following check list for troubleshooting
when you have problems with your TV. Consult
your local dealer or service outlet if problems
persist. Make sure that all connections are
correctly made when using with other units.
Problem Solution
TV does not • Make sure that the power cord is
operate plugged in.
• Try another AC outlet.
• Power is off, check fuse or circuit
breaker.
• Unplug your TV for an hour, then plug it
back in.
Poor or no • Station or cable experiencing problems,
sound tune to another station.
• Check the sound adjustments (Volume
and Mute).
• Check for possible sources of
interference.
Poor or no • Station or cable experiencing problems,
picture tune to another station.
• Make sure that channels are set into
memory.
• Check antenna or cable connections,
and try adjusting the antenna.
• Check for sources of possible
interference.
• Check picture control adjustments.
Poor reception • Station or cable experiencing problems,
on some tune to another station.
channels • Make sure that channels are set into
memory.
• Station is weak, adjust the antenna to
receive a better reception.
• Check for possible sources of
interference.
24
to select SIGNAL METER,
. The SIGNAL METER
123-045
80
www.insignia-products.com
Poor or no color • Station or cable experiencing problems,
tune to another station.
• Make sure that channels are set into
memory.
• Check the picture control adjustments.
• Check the antenna or cable connections,
adjust the antenna.
• Check for possible sources of
interference.
Picture wobbles • Station or cable experiencing problems,
or drifts tune to another station.
• Make sure that channels are set into
memory.
• The cable company is scrambling the
signal.
• Adjust the antenna.
Digital broadcast • Check the digital signal strength.
screen problem
No cable TV • Check all cable connections.
reception • Set TV/CABLE menu option to the
CABLE mode.
• Station or cable system problems, try
another station.
Horizontal or • Check the antenna connections and
diagonal bars on adjust or re-direct the antenna.
the screen • Check for possible sources of
interference.
No reception • Make sure that the TV/CABLE menu
above channel option is in the appropriate mode.
13 • If you are using an antenna, check the
UHF antenna connections.
No remote • Batteries are weak, dead, or inserted
control incorrectly.
operation • The remote is out of range, move closer
to TV (within 15 feet).
• Make sure that remote is aimed at the
sensor.
• Confirm that there are no obstructions
between the remote and your TV.
• Make sure that the power cord is
plugged in.
TV turns off • No broadcast on the station tuned.
• The Sleep Timer is set.
• The power has been interrupted.
Closed Caption • The TV station is experiencing problems
is not activated or the program tuned is not closed
captioned. Try another channel.
• Check the cable connection or the VHF/
UHF antenna. Reposition or rotate the
antenna.
• Set the Closed Caption decoder in the
menu.
The display is • Select the correct language in the menu
not shown in options.
your language