Panel Descriptions; Front Panel - Leviton 41920-HRC Manual Del Usuario

41920-HRC

Panel Descriptions

Front Panel

1) POWER – LED indicator glows red when power is applied
2) IR IN – IR receiver transmits IR data through the HDBaseT link to the receiver
3) LINK – LED indicator glows green when an HDBaseT link is established
4) RESET – This button performs a soft reboot of the Autoswitching Wallplate
5) HDCP – LED indicator glows green when an HDCP link is established
6) VGA – LED indicator glows green when the VGA input is active, amber when a source is
available, and does not light when there is no source connected
7) VGA INPUT – HD15 connector
8) HDMI 1 – LED indicator glows green when HDMI 1input is active, amber when a source is
available, and does not light when there is no source connected
9) HDMI 1 INPUT – HDMI connector with locking feature
10) SOURCE/AUTO – Button switches sources and upon push and hold changes mode between
Auto and Manual source select. LED indicator glows green when in Auto mode
11) PROGRAM – Micro USB connector used to copy and paste IR data when using a 41920-CP8
8-button Control Panel
12) LEARN – Button used to put 41920-CP8 8-button Control Panel into program mode
13) HDMI 2 - LED indicator glows green when HDMI 2 input is active, amber when a source is
available, and does not light when there is no source connected
14) HDMI 2 INPUT – HDMI connector with locking feature
15) AUDIO IN – 3.5mm stereo audio connector supplies audio for the VGA input
1 2 4
3 5
9 10 11
8
12 13
5
6
7
14
15
DI-010-41920-25C