10A; Description; Technical Specification - Narex ASV 14-2A Instrucciones De Uso Originales

Table of contents
Description: ........................................................................................15
Technical specification .....................................................................15
General Power Tool Safety Warnings .............................................16
Special safety instructions for drills ................................................16
Charger safety warnings ..................................................................16
Information about noise level and vibrations ..............................16
Use .......................................................................................................17
Double insulation ..............................................................................17
Charging battery pack instructions................................................17
Putting into operation ......................................................................18
Maintenance and service .................................................................18
Accessories..........................................................................................18
Storage ................................................................................................18
Environmental protection ................................................................18
Warranty .............................................................................................19
Certificate of Conformity ..................................................................19

Technical specification

Model
Voltage
Idle speed:
Max. torque
Chuck - scope of clamping
Wood screws - dia. max.:
Drilling - dia. max.:
Threaded spindle for chuck
Weight w/o accumulators
Charger:
Model
Input voltage
Frequency
Power input
Output voltage
Charging current
Charge time
Weight
Class of protection
Accumulator:
Model
Voltage
Cell type
Capacity
Temperature of charging
Charge time
Monitor. of the temp.of charging
Weight
* Depending on model and capacity of the accumulator to be charged!
Cordless drill/driver ASV 14-2A; ASV 18-2A
Original operating manual (EN)
1st range
2nd range
into metal
into wood
AP 14 LI
14.4 V
Li-Ion
2.0 Ah
0-45 °C
ca 30 min
thermistor
0.43 kg

Description:

1 .......Accumulator
2 .......Accumulator clamp
3 .......Switching-in push button with speed control
4 .......Reversing switch
5 .......Speed changing switch
6 .......Adjusting ring for torque setting
7 .......Workplace LED lighting
8 .......Chuck clamp sleeve
9 .......Accumulator state indication panel
10a ...Indication switch
10b ..Accumulator state indicator
11 .....LED signal lights
12 .....Charger
13 .....Vent holes of the accumulator air cooling system
*) Depicted or displayed accessories need not necessarily be-
come the integral part of delivery.
ASV 14-2A
14.4 V
0-460 rpm
0-1 600 rpm
54 Nm
1.5-13 mm
7 mm
13 mm
35 mm
1/2"-20 UNF
1.25 kg
AN-UNI C
110-240 V
50-60 Hz
80-100 W
16.6-20.7 V
4 A
ca 30-60 min*
0.7 kg
II /
AP 14 LU AP 18 LI
14.4 V 18.0 V
Li-Ion Li-Ion
4.0 Ah 2.0 Ah
0-45 °C 0-45 °C
ca 60 min ca 30 min
thermistor thermistor
0.67 kg 0.52 kg
English
ASV 18-2A
18.0 V
0-460 rpm
0-1 600 rpm
60 Nm
1.5-13 mm
8 mm
13 mm
40 mm
1/2"-20 UNF
1.4 kg
AP 18 LU
18.0 V
Li-Ion
4.0 Ah
0-45 °C
ca 60 min
thermistor
0.80 kg
15