Dynex DX-E201 Guia Del Usuario página 18

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Dynex5x7-multi.book Page 18 Thursday, September 8, 2005 11:07 AM
18
2 Click the Configuration tab, then check the components listed in the
dialog box to make sure that you have all of the following components
installed:
• Client for Microsoft Networks
• Dynex DX-E201 CardBus PC Card
• NetBEUI
• TCP/IP
3 If any components are missing, click Add to install them. Highlight the
component you need, click Add, then double-click the component that you
need to install. Click Close to exit.
Note: If you are using Windows 98SE, enable File and Printer Sharing to make
your computer visible on the network.
4 Click the Identification tab. Type the name of your computer in the
Computer name box. Use a unique name.
5 If you want to enter a workgroup name, type the name in the Workgroup
box. The workgroup name must be identical for all computers on your
network. If one computer on your network has a different workgroup name
than the others, that computer will not appear in the same workgroup
view.
6 Click the Access Control tab. The screen that controls file sharing opens.
7 Click Share-level access control. If connecting to a NetWare server, share
level can be set to User-level access control.
Component configuration

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido