Publicidad
085501438c.pmd
Operation mode selection
(only PMB 2000 series)
Three different flash
sequences may be set. The
selection is done a) by the
DIP switch on the PCB or
b) by the external operation
mode control (as option only
at DC-type PMB 2000-
Series).
Danger
Electrical voltage!
Before opening the
housing the flash light
must have been
potential-free for ten
minutes at least!
Cleaning
•
Do neither use solvents,
petrol nor similar liquid
for cleaning!
•
Clean surface using wet
cloth.
13
Publicidad
