Stellcase Ology Guía Rápida página 4

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2. Technical data (electrical height adjustment)
Dimensions and weight
Mains voltage
Rated frequency
Maximum load capacity
Maximum "on" duration
Maximum adjustment range:
Single telescope
Double telescope
Noise emission
Max. power consumption
during lifting
Power consumption in standby
mode
Type plates are located on the controller housing, on the telescopic columns,
and on the underside of the desktop. Further down is an explanation of the
symbols on the nameplate.
EN
Name plate: symbols - explanation
Double insulation. Double insulated cables minimise the risk of electrical shock.
For indoor use. Indicates that placing the product outdoors is not allowed.
CE marking. Symbolises the conformity of the product with the applicable requirements
that the European Community places on the manufacturer.
Recycling symbol. Indicates conformity with the regulations for Waste of Electrical and
Electronic Equipment (WEEE) and the Federal Electrical and Electronic Equipment Act
(ElektroG). Electrical and electronic products must be disposed of separately from
household waste at the end of their service life.
122957
Ology – two table legs
See delivery note
230 V AC
50 Hz
Approx. 75 kg / 750 N
int. 10% max., 2min. ON /18 min. OFF
720 mm to 1200 mm
650 mm to 1250 mm
<60 dB (A)
300 W
≤ 0.1 W
The CE marking is located on the underside of the desktop and can be viewed at any time.
Ology – three table legs
See delivery note
100-240 V AC
50-60 Hz
Approx. 75 kg / 750 N
int. 10% max., 2min. ON /18 min. OFF
720 mm to 1200 mm
650 mm to 1250 mm
<60 dB (A)
450 W
≤ 0.1 W
Rev. E

Publicidad

Tabla de contenido
loading

Productos relacionados para Stellcase Ology

Este manual también es adecuado para:

Ology bench

Tabla de contenido