Before You Begin - Stellcase Workplace Advisor Instrucciones De Instalación

®

BEFORE YOU BEGIN

Prior to installation
- Confirm with customer IT contact that gateways are installed and online
- Have customer contact reserve rooms for installation, approximately 15 minutes per room
- Have customer contact identify special surfaces to avoid when using screws. Confirm if you can drill into ceiling/walls if needed.
Day of installation (on-site)
- Verify you have one package per space (sensors are pre-packaged per space and are pre-assigned to spaces in Workplace Advisor;
DO NOT unbox until on-site and in the assigned space)
- Walk through site with customer contact; verify location of gateways and review room reservations
What's included
- Sensor(s): wall, curtain, corner and/or ceiling
- Batteries: one (1) CR-123 for all sensors
- Mounting adhesive strips pre-installed on sensor mounting brackets
- Sensor mounting bracket(s)
- One alcohol wipe per sensor
1
2
3
4
Wall/ceiling/corner
sensor
© 2017 Steelcase Inc. If you have a problem, question, or request,
Grand Rapids, MI 49501 contact Steelcase CX (TechCX@steelcase.com) or
U.S.A. 888.STEELCASE
for immediate action by people who want to help you.
Printed in U.S.A.
1
2
Wall/ceiling/curtain
mounting bracket
3
4
Description
1.
Curtain sensor
2.
(888.783.3522)
Steelcase Workplace Advisor - Sensor Kit
Corner
mounting bracket
Sensor lens 3. Battery
LED indicator 4. Push button
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
Installation Instructions
Install plans from
design team
3/16"
(5mm)
Note:
A laser
measuring
tape will
make
installation
easier.
Device with
Internet access
and web browser
[optional, if using screws
from hardware package]
Alcohol
wipe
#2 Phillips bit
3/16" drill bit
YBO
RA
Page 2 of 41
1083528001 Rev B