Steren STV-050 Manual De Instrucciones página 33

Loosen the central nut on the plate to set the position of the screen (vertical or
horizontal). Tighten the nut and screw the back of your display to the bracket.
Finally place the plate mounted to screen on the support arm making sure to
firmly fix the nuts.
5. Once the screen is installed, locate the
2 horizontal adjustment screws and use
the hex wrench (M) to loosen them a little.
Place the display on the angle that you
want and then retighten the screws.
6. Make the necessary connections on
your screen. Use the hook located on the
arm to secure the necessary cables.
Product design and specifications are subject to change, without notice.
16 16
4.2 Wall installation