Blank Skip; Repeat Play - Panasonic CQ-R221U Manual De Instrucciones

Blank Skip

Press [5] (SKP) to skip long unrecorded portions on the tape.
This is most convenient if you quickly want to skip the remaining
unrecorded portions at the end of the tape and fast forward to the
beginning of the first music on the reverse side of the tape.
To turn it off, press [5] (SKP) again.
Notes:
"B·SKIP" indicator lights. However, the blank skip operation will
not work if REPEAT is on. The repeat function has priority over
that of the blank skip function.
Also the blank skip operation will not work when the unrecorded
portion of the tape is less than 15 seconds.

Repeat Play

Press [4] (REP) to repeat the same music you are now listening
to.
After finishing the music just listened to, the rewind starts
automatically until the beginning of music, and the same music
starts playing again.
To turn it off, press [4] (REP) again.
Metal Tape Mode
Press [1] (MTL) when playing metal or chromium dioxide (CrO
tapes.
To turn it off, press [1] (MTL) again.
Note: Playing non-metal tapes in metal tape mode mode causes
high frequency imbalance, which affects tone quality.
Dolby Noise Reduction
Press [2] (NR) to set the Dolby B NR mode.
To cancel the Dolby NR mode, press [2] (NR) again.
Note:
Set the Dolby B NR mode when playing back a tape recorded with
Dolby B Noise Reduction.
CQ-R221U
E
N
G
L
I
S
H
6
)
2
15