Sensor Partners i-Tec USB Serie Guía Del Operario página 3

OPTIONS
The following options are available. Options are factory installed and must be
ordered with the I-Tec USB sensor.
Air/water cooled housing
Certificate of calibration
Longer cable (30 m max.)
OPTICAL CHART
The optical chart below indicates the nominal target spot diameter at any given
distance from the sensing head and assumes 90% energy.
Distance: Sensor to object (inches)
0 19.7
1.9
0.6
D:S 15:1
15
48
0 500
Distance: Sensor to object (mm)
I-Tec USB-115
INSTALLATION
The installation process consists of the following stages:
Preparation
Mechanical installation
Electrical installation
Please read the following sections thoroughly before proceeding with the installa-
tion.
PREPARATION
Ensure that the sensor is positioned so that it is focused on the target only.
Distance: Sensor to object (inches)
39.4 0
3.2
0.6
15
82
1000 0
Distance: Sensor to object (mm)
I-Tec USB-130
19.7 39.4 0
1.9
1.2
0.6
D:S 30:1
15
32
48
500 1000 0
Distance: Sensor to object (inches)
3.9 7.9
0.6
0.2
5
15
100 200
Distance: Sensor to object (mm)
I-Tec USB-CF
3