Checklist When Data Is Missing In The Display - ADE CK 1704 Manual Del Usuario

The receiving process is started again at a later point in time. In
this case, the time proceeds as usual (beginning with the start
time of "00:00").

Checklist when data is missing in the display

1. Check whether the location of the clock is suitable, see
"Choosing a location".
2. Manually restart the receiving process, see "Starting signal
reception manually".
3. Wait until the clock automatically switches back to
receiving mode at a later time.
4. Manually perform settings if reception is not possible at
your location, see "Setting the time manually".
41