WATCHING TV
WATCHING TV
TURNING ON THE TV
First, connect power cord correctly and switch the AC power control switch on TV. (Except 22/26/32LD330,
1
32/42LD420, 32LD340, 26/32LD331C, 22/26LD330C) At this moment, the TV switches to standby mode.
In standby mode to turn TV on, press the
n
POWER, INPUT, TV, CH(∧ or ∨), Number (0~9) button on the remote control.
Select the viewing source by using the INPUT button on the remote control.
2
This TV is programmed to remember which power state it was last set to, even if the power cord is out.
n
When finished using the TV, press the POWER button on the remote control. The TV reverts to standby
3
mode.
MAIN POWER
SWITCH
(BOTTOM OR BACK)
NOTE
►
If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
►If you do not complete the Initial setting, the it will appear whenever the TV is switched on until
the Initial setting procedure is completed.
►If this TV is unplugged once or turn off with the AC power control switch on the TV, reset the Clock
function.
28
, INPUT, CH (
▲ ▼
When the TV can't be turned on
with the remote control, press the
main power switch on the TV.
Except 22/26/32LD330, 19/22LH20R, 32/42LD420, 32LD340,
26/32LD331C, 22/26LD330C
or ∧∨) button on the TV or press the