W
ELCOME TO
For the PCSU200 unit, a complete USB-powered lab-in-a-box!
Feature-packed PCLab200 software for two channel oscilloscope, spectrum analyzer, recorder, function
generator and Bode plotter. Integrated signal wave editor and automated sequence generator, using fi le or
external input.
The hardware is not necessary to evaluate the software in Demo mode.
General information
•
markers for amplitude/voltage and frequency/time
•
input coupling: DC, AC and GND
•
8 bit resolution
•
storage of display and data
•
supply from USB port (500mA)*
•
dimensions: 100x100x35mm / 3,9x3,9x1.4"
Spectrum analyser:
•
frequency range: 0 .. 120Hz to 12MHz
•
linear or logarithmic timescale
•
operating principle: FFT (Fast Fourier Transform)
•
FFT resolution: 2048 lines
•
FFT input channel: CH1 or CH2
•
zoom function
Transient recorder:
•
timescale: 20ms/Div to 2000s/Div
•
max record time: 9.4hour/screen
•
automatic storage of data
•
automatic recording for more than 1 year
•
max. number of samples: 100/s
•
min. number of samples: 1 sample/20s
* NOTE: it is NOT recommended to use an USB - HUB device, this can cause the software to stop working.
SPECIFICATIONS ARE SUBJECT TO MODIFICATIONS - DLL available for own development - www.velleman.eu
4
P
-L
200
C
AB
Function generator
•
•
•
•
Oscilloscope
•
•
•
•
•
•
•
•
•
Bode plotter
•
•
•
SOFTWARE
frequency range: sine from 0.5Hz to 1MHz
square and triangle from 0.5Hz to 500kHz
extended waveform library
amplitude range: 200mVpp to 8Vpp @ 1KHz//
output impedance: 50ohm
bandwidth: two channels DC to 12 MHz ±3dB
input impedance: 1 Mohm / 30pF
maximum input voltage: 30V (AC + DC)
time base: 0.1μs to 500ms per division
input range: 10mV to 3V/division
readouts: True RMS, dBV, dBm, p to p, Duty
cycle, Frequency...
record length: 4K samples / channel
sampling frequency: 250Hz to 25MHz
sample history and digital grab function
Automated sync between oscilloscope and
generator
Frequency range: 1kHz , 10kHz, 100kHz, 1MHz
Frequency start: 1Hz, 10Hz, 100Hz, 1kHz, 10kHz