Conceptronic C54BRS4 Guia De Inicio Rapido página 29

ENGLISH
Parameter
Obtain an IP address
Use the following IP address
IP Address
Subnet Mask
Gateway
User ID
Password
PPTP Gateway
Connection ID
BEZEQ-ISRAEL
Connection Type
Idle Time
Description
The ISP requires you to obtain an IP address by DHCP
automatically before connecting to the PPTP server.
The ISP give you a static IP to be used to connect to the
PPTP server.
This is the IP address that your ISP has given you to
establish a PPTP connection.
Enter the Subnet Mask provided by your ISP
(e.g. 255.255.255.0)
Enter the IP address of the ISP Gateway
Enter the User Name provided by your ISP for the PPTP
connection. Sometimes called a Connection ID
Enter the Password provided by your ISP for the PPTP
connection
If your LAN has a PPTP gateway, then enter that PPTP
gateway IP address here. If you do not have a PPTP
gateway then enter the ISP's Gateway IP address above
This is the ID given by ISP. This is optional.
Select this item if you are using the service provided by
BEZEQ in Israel.
If you select "Continuous", the router will always connect to
the ISP. If the WAN line breaks down and links again, the
router will auto-reconnect to the ISP.
If you select "Connect On Demand", the router will auto-
connect to the ISP when someone want to use the Internet
and keep connected until the WAN idle timeout. The router
will close the WAN connection if the time period that no one
is using the Internet exceeds the "Idle Time".
If you select "Manual", the router will connect to ISP only
when you click "Connect" manually from the Web user
interface. The WAN connection will not disconnected due to
the idle timeout. If the WAN line breaks down and latter links
again, the router will not auto-connect to the ISP.
You can specify an idle time threshold (minutes) for the WAN
port. This means if no packets have been sent (no one using
the Internet) throughout this specified period, then the router
will automatically disconnect the connection with your ISP.