Repeat alarm (snooze function)
− Press the SNOOZE/LIGHT button 1x when the
alarm sounds.
After 5 minutes, the device switches on again
and wakes you up again. This procedure can be
repeated multiple times.
Switching the alarm function on/off
− Press ALARM 1x to switch off the alarm
function,
reactivates the alarm function.
Other functions
Illuminating the display
− Press the SNOOZE/LIGHT button to illuminate
the display for approx. 5 seconds.
Change temperature unit
− Press the
temperature in °Celsius or °Fahrenheit.
Switching between summer and
winter time
Switching between summer and winter time, or
vice versa, takes place automatically with good
time signal reception.
When daylight saving time is active, the display
shows "DST" (Daylight Saving Time).
40
and z
goes out. Pressing ALARM again
button to display the
DCF Radio-controlled alarm clock CK 1940
flash in the display.
z