Vasner Appino BEATZZ Manual De Instrucciones página 26

VASNER
8. Switching off: Use the "Off" button to switch the radiator off again.
The LED display switches back to blue. Then switch the "On/Off switch" to
"0" to switch the heater off completely. For safety, we also recommend
unplugging the heater.
Caution / Warning:
If you switch the heater off using the remote control or app, it is still in standby
mode and is NOT DISCONNECTED from the power supply.
By removing the batteries when you are not using the remote control, you can
increase the battery life.
Reset function button:
The Reset button can be used in the following situations:
1. For manual operation of the heater's graduated heating control. Pressing the
button several times allows you to switch between 3 heating levels:
2000W / 1320 W / 660 W / OFF > ON ...
2. Resetting the radiator to the factory setting, as well as resetting the password.
To do this, hold down the Reset button for approx. 4 seconds until the LED at
the front flashes quickly. The release it again. For a new connection, you must
then enter a new password into the app.
Operate the radiator using the "VASNER" app:
You can operate the Appino BEATZZ using the "VASNER" app and Bluetooth
connection via your smartphone and tablet. To do this, download the "VASNER"
app from Apple or Google Play and then install it.
Apple: App Store > Search for "VASNER"
Android:
Google Play Store > Search for "VASNER"
26
GB