Caring For Your Simplyflo System; Cleaning The Device; Cleaning The Accessories - Philips Respironics simplyFLO Manual Del Usuario

simplyFLO User Manual

Caring for your simplyFLO System

Cleaning the Device

Warning: To avoid electrical shock, do not remove the simplyFLO covers� The
covers should only be removed by authorized service personnel� Do
not apply liquid directly to the covers� Do not use alcohol, solvents,
polishes or any oily substances on the device, as they are flammable�
Caution: Do not allow liquids into any of the controls, the interior of the case,
or the oxygen tubing connector� If this occurs, contact your home
care provider for assistance�
The exterior cover of the device should be cleaned as needed:
1. Turn the device off and disconnect from the power source before
cleaning�
2� Clean the device exterior using a damp cloth with a mild household
cleaner and wipe it dry� Or, if you use medical disinfectants, be sure
to follow the manufacturer's instructions. For disinfection, Philips
Respironics recommends the following:
- Discide Ultra Towelettes: Manufacture - Palmero, www.palmero-
health�com (or equivalent)

Cleaning the Accessories

Follow the instructions below when cleaning the accessories.
AC Power Supply/Power Cord
The AC power supply and power cord should be cleaned as needed�
1� Disconnect cords from device before cleaning�
2� Clean the cords using a cloth with a mild household cleaner and wipe
dry�
Cannula and Tubing
Clean and replace the cannula and tubing as instructed by the manufacturer
and your home care provider�
16