Astralpool TIT-20 KW Manual Tecnico página 7

3.3. INSTALLATION
Install the heat exchanger only in areas with a non-aggressive atmosphere and free of frost.
Any drop on it could damage it.
A free access for install/des install must be granted.
The heat exchanger can be installed under/ or over the water level.
¡Important!
Meanwhile the boiling cycle is on; the heat exchanger never can be drained
from the water poolside.
3.4. ASSEMBLY
Check that there are not evident heat exchanger damages before assembling it.
The heat exchanger can be installed in horizontal or vertical under or over the water level.
3.5. ASSEMBLY DIAGRAM OVER THE WATER LEVEL
Models:
41426 / 41427 / 41428
43506 / 43507 / 43508
Models:
65539 / 65540 / 65541
ENGLISH
41426 / 41427 / 41428