Sunny SF-T7718 Manual Del Usuario página 30

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SAFETY LOCK FUNCTION:
Removing the Safety Key (No. D07) from the computer console while the treadmill is running will
cause it to stop immediately. Once the treadmill reaches a full stop, the window display of the
computer will show "- - -" and the buzzer will beep 3 times. To start the treadmill again, insert the
magnet end of the Safety Key (No. D07) into the computer console and press the START button.
POWER SAVE FUNCTION:
When the treadmill has been inactive for 10 minutes, it will enter Power Saving Mode. While the
treadmill is in this mode, the window display of the computer will be turned off. To turn it back on, press
any button.
POWER ON:
Flick the power switch to this symbol to turn on the treadmill.
POWER OFF:
Flick the power switch to this symbol to turn the treadmill off at anytime. This includes during exercise.
SAFETY NOTE:
1. We recommend that you maintain a slow speed at the beginning of a session and hold the handrails
until you have become familiar with the treadmill.
2. Insert the magnet end of the Safety Key (No. D07) into the computer console and attach the
opposite end (containing the safety clip on it) to your clothing before starting your workout. To end
your workout, press the STOP button or remove the Safety Key (No. D07) and the treadmill will
stop immediately.
TREADMILL FUNCTIONS
29

Publicidad

Tabla de contenido
loading

Tabla de contenido