CAMERA OPERATION
Video resolution
Select video resolution.
Options: 1080P (1920 x 1080, 15 fps), 720P (1080 x 720, 30 fps),
WVGA (848 x 480, 30 fps), VGA (640 x 480, 30 fps)
Video Length
Set the length of each video clip recorded each time motion is
detected (between 1–60 seconds or 1–10 minutes). The longer the
recording time selected the shorter the operating time. The preset
video length is 30 seconds.
Audio recording
Opening this function, you can record sound while recording video.
Shot lag
Set the time period that the camera should wait before reacting to
subsequent activation of the main sensor after the initial recording.
During the selected interval, the camera will not record any images or
videos. This prevents the memory card from being filled up with too
many recordings of the same event. You can select between 5–60
seconds or 1–60 minutes.
Side motion sensors
The default setting is On. The two side PIR sensors provide
wider sensing angle and enhance response time. However, in
some situations you have difficulty removing the interfering
twigs, or avoiding the sunlight. If so, you have the option to turn