Camera Operation - distianert DH-8 Manual De Instrucciones

CAMERA OPERATION

Mode Switch
There are three basic operational modes:
• OFF mode: Power switch in the OFF position.
• ON mode: Power switch in the ON position (LCD screen is off.)
• TEST mode: Power switch at TEST position (LCD screen is on).
OFF Mode
The OFF mode is the "safe" mode when any actions must be taken,
e.g. replacing the SD card or batteries, or transporting the device.
ON Mode
The camera will take photos or videos automatically (according to its
current parameter settings) when it is triggered by the PIR sensor's
detection of activity in the area it covers.
TEST Mode
In the TEST mode you can check and change the settings of the
camera with the help of its built-in LCD. These settings, found in the
TEST Menu, let you change the photo or video resolution, interval
between photos, switch the time imprint on, etc.
Change Setting in TEST Mode
The main purpose of the TEST mode is to allow you to change the
settings of the camera's parameters so your trail camera operates
exactly the way you want it to.