distianert DH-8 Manual De Instrucciones página 23

TROUBLE SHOOTING/FAQ
conserve power.
Date/Time Stamp not appearing on images
Make sure that the Time Stamp parameter is set to 'On'.
PIR Sensor LED Flashes/Doesn't Flash
1. When the camera is in the TEST mode, a special LED on the front
of the camera will flash when it senses motion. This is for setup
purposes only and will help the user aim the camera.
2. During use, the LED will not flash when the camera takes an image.
This is to help keep the camera hidden from game.
Camera won't retain settings
Make sure that you have been saving the changes to any parameter
settings that you made while in Setup mode, by pressing OK after
changing the setting.
Moisture or Ants inside Camera
1. To ensure humidity or rain is kept out of the camera, secure the DC
In plug firmly in place.
2. Ants can be attracted by low level electronic vibrations, and enter
through any gaps between the exterior and interior of the camera.
Make sure the DC In plug is securely attached.